 |
Step 1
Mark the form for slab centre and Speed Sleeve spacing. Using 3 suitable nails or screws fix the Speed Sleeve Base Plate to the form |
 |
Step 2
Set the form to line and level as normal. Slide the sleeve onto the base ensuring that it is flush with the base plate. Dowel support may be required to ensure the sleeve is not dislodged during concrete placement & base plates are reusable (optional) |
 |
Step 3
Place and finish the concrete.
Edge of slab must be vibrated to consolidate concrete around The Speed Sleeve (Take care not to dislodge the sleeve).
|
 |
Step 4
Strip the form, this is best accomplished by starting at one end and working along the form. Forms with base plates attached should be cleaned and stored for reuse. |
 |
Step 5
Insert the burr free end of the dowel bar into the Speed Sleeve. Second concrete pour can now proceed.
|